Products
Vodaluft Products
Turnkey Product
|
Product Range
|
User Industries
|
Axial Fans - RangeDia: 1250 TO 1800 Blades: 3 T0 12 Operating: 600 Pa AT 1440 RPM |
Drum Filter - RangeDia: 1600 TO 3000 Length: 1600 TO 6400 Operating: External Cleaning with Traverse System |
Advantages
|
Central Air Systems with or without Central Monitoring System
Vodaluft Excels in the field of Air Engineering System to Offer the Indian Market State of the Art Technology in Air Engineering. Today it's key Assets are in Air Design Project Management & Installation. The Complete Advantage is maintained by Incorporating the most Advance Technologies.
CENTRAL SYSTEM
This system facilitates removal of heat generated & dust produced at the source it self. This is affected through central Suction system. The dust is collected through automatic filters, Stationary filters. The air masher is either induced draft OP forced draft depending upon the site conditions. The condition air is distributed through over head ducting & diffusers. The desired condition ape created by attaining a fine balance between the fresh air, return air, exhaust air & by pass air, regulating the saturation efficiency of the air washer by using the micro base controller.
SILENT SPECIAL FOR
A Dedicated Software Programme. Monitoring & Logs The Operation of the of the by using the micro base controller. Plants From The Logged Data. Status Of Temp & R/H. Can be Obtained. Percentage of Opening & Closing of Damper Percentage of Opening & Closing of Valve. Trands of Temp & Humidity With Respect to The Set Point.
Total plant Control
The System can control humidity, temperature, pressure, flow, ventilation, lighting, access, elevators escalators & process parameters. These Services can be fully integrated into a building control & industrial process control Systems.
Users of Application
|
Axial flow Fans
Salient Features
|
Application
|
Damper
|
Leakage Dampers
|
Dampers are also available in
|
Rotary Air filter - efficient, economic, easy to maintain
The rotary air filter is a well proven fine dust filter for exhaust air with a high concentration of dust and fibres in spinning and weaving mills.
Salient Features
|
Air Washer
The Air Washer can be applied either in a centralized air handling system or, as a stand - alone unit in a central station of Masonry. The housing stands clear of the ground on a base frame and consists of standardized Panels. A Pump draws the water directly from a tank. In case of water filtration or of chilled water operation, an additional reservoir is used. The Air Washer is also available, without housing, for being built into a centre station of masonry.
Difuser & Grills
|
Airfoil / Multi van fan
|
Application
- Double & Single width fans provide the highest efficiency.
- Lowest power & sound levels so used in air-handling-unit & evaporates from the Powder, Granular & Others.
Eliminators
The Basic Purpose of Eliminator was Control the Undesirable Loss of Water to Reduce the Damage Mechanical Components and to Reduce the Nuisance Caused to Equipment in due to Spray. A drift loss in the Range of 0.05% of the Circulating Water Flow Considered to Sufficient Low and acceptable. Available in PVC, G.I. Aluminium, S.S.
The Advantages of PVC Eliminators
- Dramatically Reduces Maintenance Costs
- Less expensive than
- Easy to Install, Simple to Clean
- Are Economical
- Can be used in all Types of Towers
- Made from PVC Materials
- 100% Guaranteed Against Corrosion for the Life of your Equipment
- Offers Low Pressure Drop
- Can be Custom-made for any application
- Have Longer Life Gas PVC is not Effected due to Water and inert to of
- Can be easily Pressure Washed
- Are Light in Weight
Air tight door
Salient Features
|
Louvers
|